A
-
Absorbing material
Deviations in sound absorption measurements in the reverberation room and impedance tube [(Articles in Press)]
-
Absorbing material
Deviations in Sound Absorption Measurements in The Reverberation Room and Impedance Tube [Volume 2, Issue 2, 2022, Pages 53-64]
-
Air change per hour
Recent Preventive Methods to Reduce the Infection Diseases by Air Distributions Control [Volume 3, Issue 1, 2023, Pages 2-28]
-
Autocollimator
Methods of Union Jack and XY-Grid in Surface Plate Measurements [Volume 3, Issue 2, 2023, Pages 2-14]
B
-
Back pressure ratio
Effect of Back Pressure and Divergence Angle on Location of Normal Shock Wave [Volume 3, Issue 2, 2023, Pages 15-31]
-
Borate Glasses
Metrological and Optical –Mechanical Study of a Band Pass Glass Filter Working as Photometric Filter [Volume 1, Issue 1, 2021, Pages 22-32]
C
-
Caustic
Error analysis and uncertainty evaluation for the determination of stress intensity factor by caustic [Volume 3, Issue 2, 2023]
-
Cellulose nanocrystals
Facile route for synthesis of flame retardant, antibacterial and conductive fabrics [Volume 3, Issue 2, 2023, Pages 42-56]
-
CGPM
Updated SI prefixes extension: ronto(r), quecto(q), ronna(R), quetta(Q) [Volume 3, Issue 1, 2023, Pages 29-34]
-
CIE Lab
Influence of Public Museum Conditions on Polymer Degradation and Color Change of Historical Dyed Wool Textiles [Volume 1, Issue 1, 2021, Pages 74-87]
-
CO2 capture
Nanoporous Materials as Tool for Natural Gas Purity Upgrading [Volume 2, Issue 2, 2022, Pages 16-27]
-
CO2/CH4 separation selectivity
Nanoporous Materials as Tool for Natural Gas Purity Upgrading [Volume 2, Issue 2, 2022, Pages 16-27]
-
Conducting polymers
Facile route for synthesis of flame retardant, antibacterial and conductive fabrics [Volume 3, Issue 2, 2023, Pages 42-56]
-
CR-39 Detector, Chemical Etching
Evaluation of CR-39 Track Parameters by Utilizing Chemical Organic Additives to NaOH Etchant [Volume 1, Issue 1, 2021, Pages 61-73]
D
-
Depth of field (DOF)
New Simple Large Depth of Field Fringe Projection Profilometry System Using Laser Projector [Volume 2, Issue 2, 2022, Pages 28-39]
-
Digital holographic microscopy
Off-axis tilt elimination in digital holographic microscopy by self-hologram rotation: applications in surface metrology [Volume 2, Issue 2, 2022, Pages 40-52]
-
Disperse dye
Method validation of quantitative FTIR as rapid and green analytical technique for dyes [Volume 3, Issue 1, 2023, Pages 54-63]
-
Disperse dye
Method validation of quantitative FTIR as a rapid and green analytical technique for dyes [(Articles in Press)]
-
Divergent angle
Effect of Back Pressure and Divergence Angle on Location of Normal Shock Wave [Volume 3, Issue 2, 2023, Pages 15-31]
-
Dose calculation
Insights to Achieve More Accuracy for the Conventional Treatment Planning Systems [Volume 1, Issue 1, 2021, Pages 33-52]
E
-
Ecofriendly
Recent progress in acoustical materials and noise control approach [Volume 3, Issue 2, 2023, Pages 32-41]
F
-
Femtosecond frequency comb
Femtosecond Lasers for Optical Frequency Measurement [Volume 2, Issue 2, 2022, Pages 2-15]
-
Fire testing, Uncertainty
Applying risk analysis thinking in uncertainty estimation for LOI testing according to ISO 4589 [Volume 2, Issue 2, 2022, Pages 65-75]
-
Flame retardancy
Facile route for synthesis of flame retardant, antibacterial and conductive fabrics [Volume 3, Issue 2, 2023, Pages 42-56]
-
Flatness measurements
Methods of Union Jack and XY-Grid in Surface Plate Measurements [Volume 3, Issue 2, 2023, Pages 2-14]
-
Fracture mechanics
Error analysis and uncertainty evaluation for the determination of stress intensity factor by caustic [Volume 3, Issue 2, 2023]
-
Fringe Projection Profilometry (FPP)
New Simple Large Depth of Field Fringe Projection Profilometry System Using Laser Projector [Volume 2, Issue 2, 2022, Pages 28-39]
-
FTIR
Influence of Public Museum Conditions on Polymer Degradation and Color Change of Historical Dyed Wool Textiles [Volume 1, Issue 1, 2021, Pages 74-87]
-
FTIR
Method validation of quantitative FTIR as rapid and green analytical technique for dyes [Volume 3, Issue 1, 2023, Pages 54-63]
-
FTIR
Method validation of quantitative FTIR as a rapid and green analytical technique for dyes [(Articles in Press)]
G
-
Green analytical technique
Method validation of quantitative FTIR as rapid and green analytical technique for dyes [Volume 3, Issue 1, 2023, Pages 54-63]
-
Green analytical technique
Method validation of quantitative FTIR as a rapid and green analytical technique for dyes [(Articles in Press)]
-
Gum
Uncertainty Evaluation in calibration of Engineer’s Steel Rulers and Measuring Tapes; GUM and Monte Carlo Methods [Volume 3, Issue 1, 2023, Pages 64-79]
H
-
Hardness test and Tensile test
A proposed method using t-test for stability check in proficiency testing in tensile and hardness tests [Volume 3, Issue 1, 2023, Pages 35-43]
-
Helmholtz Resonator
Recent progress in acoustical materials and noise control approach [Volume 3, Issue 2, 2023, Pages 32-41]
-
Historical textiles
Influence of Public Museum Conditions on Polymer Degradation and Color Change of Historical Dyed Wool Textiles [Volume 1, Issue 1, 2021, Pages 74-87]
I
-
Illuminance
The Dependence of the Perspective Illuminance Distribution on the Roadway Surface on the Luminaire Cross Factor (CF) [Volume 1, Issue 1, 2021, Pages 53-60]
-
Impedance tube
Deviations in sound absorption measurements in the reverberation room and impedance tube [(Articles in Press)]
-
Impedance tube
Deviations in Sound Absorption Measurements in The Reverberation Room and Impedance Tube [Volume 2, Issue 2, 2022, Pages 53-64]
-
Indoor air
Recent Preventive Methods to Reduce the Infection Diseases by Air Distributions Control [Volume 3, Issue 1, 2023, Pages 2-28]
-
Interferometry
[Review Article] Recent Techniques in Surface Metrology [Volume 1, Issue 1, 2021, Pages 2-21]
K
-
Keywords: Ventilation
Recent Preventive Methods to Reduce the Infection Diseases by Air Distributions Control [Volume 3, Issue 1, 2023, Pages 2-28]
L
-
Laser projector
New Simple Large Depth of Field Fringe Projection Profilometry System Using Laser Projector [Volume 2, Issue 2, 2022, Pages 28-39]
-
Linear accelerator
Insights to Achieve More Accuracy for the Conventional Treatment Planning Systems [Volume 1, Issue 1, 2021, Pages 33-52]
-
LOI
Applying risk analysis thinking in uncertainty estimation for LOI testing according to ISO 4589 [Volume 2, Issue 2, 2022, Pages 65-75]
-
Luminaire cross factor
The Dependence of the Perspective Illuminance Distribution on the Roadway Surface on the Luminaire Cross Factor (CF) [Volume 1, Issue 1, 2021, Pages 53-60]
-
Luminance
The Dependence of the Perspective Illuminance Distribution on the Roadway Surface on the Luminaire Cross Factor (CF) [Volume 1, Issue 1, 2021, Pages 53-60]
M
-
Mask
Recent Preventive Methods to Reduce the Infection Diseases by Air Distributions Control [Volume 3, Issue 1, 2023, Pages 2-28]
-
Measuring Tapes
Uncertainty Evaluation in calibration of Engineer’s Steel Rulers and Measuring Tapes; GUM and Monte Carlo Methods [Volume 3, Issue 1, 2023, Pages 64-79]
-
Metamaterial
Recent progress in acoustical materials and noise control approach [Volume 3, Issue 2, 2023, Pages 32-41]
-
Modified Transducers
Ultrasonic and Optical Investigation of Mercury Content Influence on Metrological Properties of Reference Alloy Materials [(Articles in Press)]
-
Modified Transducers
Ultrasonic and Optical Investigation of Mercury Content Influence on Metrological Properties of Reference Alloy Materials [Volume 3, Issue 2, 2023, Pages 66-86]
-
Monte Carlo
Uncertainty Evaluation in calibration of Engineer’s Steel Rulers and Measuring Tapes; GUM and Monte Carlo Methods [Volume 3, Issue 1, 2023, Pages 64-79]
N
-
Nanoporous materials
Nanoporous Materials as Tool for Natural Gas Purity Upgrading [Volume 2, Issue 2, 2022, Pages 16-27]
-
Natural gas purification
Nanoporous Materials as Tool for Natural Gas Purity Upgrading [Volume 2, Issue 2, 2022, Pages 16-27]
-
New Etchant
Evaluation of CR-39 Track Parameters by Utilizing Chemical Organic Additives to NaOH Etchant [Volume 1, Issue 1, 2021, Pages 61-73]
-
Noise
Recent progress in acoustical materials and noise control approach [Volume 3, Issue 2, 2023, Pages 32-41]
-
Normal-shock wave
Effect of Back Pressure and Divergence Angle on Location of Normal Shock Wave [Volume 3, Issue 2, 2023, Pages 15-31]
O
-
Optical frequency standards
Femtosecond Lasers for Optical Frequency Measurement [Volume 2, Issue 2, 2022, Pages 2-15]
-
Optical metrology
Off-axis tilt elimination in digital holographic microscopy by self-hologram rotation: applications in surface metrology [Volume 2, Issue 2, 2022, Pages 40-52]
-
Optics
Ultrasonic and Optical Investigation of Mercury Content Influence on Metrological Properties of Reference Alloy Materials [(Articles in Press)]
-
Optics
Ultrasonic and Optical Investigation of Mercury Content Influence on Metrological Properties of Reference Alloy Materials [Volume 3, Issue 2, 2023, Pages 66-86]
P
-
Phase shifting
[Review Article] Recent Techniques in Surface Metrology [Volume 1, Issue 1, 2021, Pages 2-21]
-
Phase unwrapping
[Review Article] Recent Techniques in Surface Metrology [Volume 1, Issue 1, 2021, Pages 2-21]
-
Phosphate glasses
Metrological and Optical –Mechanical Study of a Band Pass Glass Filter Working as Photometric Filter [Volume 1, Issue 1, 2021, Pages 22-32]
-
Photon beams
Insights to Achieve More Accuracy for the Conventional Treatment Planning Systems [Volume 1, Issue 1, 2021, Pages 33-52]
-
Polyester fabric
Applying risk analysis thinking in uncertainty estimation for LOI testing according to ISO 4589 [Volume 2, Issue 2, 2022, Pages 65-75]
-
Proficiency test
A proposed method using t-test for stability check in proficiency testing in tensile and hardness tests [Volume 3, Issue 1, 2023, Pages 35-43]
Q
-
Quantitative Analysis
Method validation of quantitative FTIR as rapid and green analytical technique for dyes [Volume 3, Issue 1, 2023, Pages 54-63]
-
Quantitative Analysis
Method validation of quantitative FTIR as a rapid and green analytical technique for dyes [(Articles in Press)]
R
-
Renewable
Recent progress in acoustical materials and noise control approach [Volume 3, Issue 2, 2023, Pages 32-41]
-
Reverberation room
Deviations in sound absorption measurements in the reverberation room and impedance tube [(Articles in Press)]
-
Reverberation room
Deviations in Sound Absorption Measurements in The Reverberation Room and Impedance Tube [Volume 2, Issue 2, 2022, Pages 53-64]
-
Reynolds number
Effect of Back Pressure and Divergence Angle on Location of Normal Shock Wave [Volume 3, Issue 2, 2023, Pages 15-31]
S
-
SEM
Influence of Public Museum Conditions on Polymer Degradation and Color Change of Historical Dyed Wool Textiles [Volume 1, Issue 1, 2021, Pages 74-87]
-
SI prefixes
Updated SI prefixes extension: ronto(r), quecto(q), ronna(R), quetta(Q) [Volume 3, Issue 1, 2023, Pages 29-34]
-
SI prefixes
New SI prefixes extension: ronto(r), quecto(q), ronna(R), quetta(Q) [(Articles in Press)]
-
SI units
Updated SI prefixes extension: ronto(r), quecto(q), ronna(R), quetta(Q) [Volume 3, Issue 1, 2023, Pages 29-34]
-
SI units
New SI prefixes extension: ronto(r), quecto(q), ronna(R), quetta(Q) [(Articles in Press)]
-
Social distance
Recent Preventive Methods to Reduce the Infection Diseases by Air Distributions Control [Volume 3, Issue 1, 2023, Pages 2-28]
-
Sonic nozzle
Effect of Back Pressure and Divergence Angle on Location of Normal Shock Wave [Volume 3, Issue 2, 2023, Pages 15-31]
-
Stability check
A proposed method using t-test for stability check in proficiency testing in tensile and hardness tests [Volume 3, Issue 1, 2023, Pages 35-43]
-
Steel Rulers
Uncertainty Evaluation in calibration of Engineer’s Steel Rulers and Measuring Tapes; GUM and Monte Carlo Methods [Volume 3, Issue 1, 2023, Pages 64-79]
-
Stress Intensity Factor
Error analysis and uncertainty evaluation for the determination of stress intensity factor by caustic [Volume 3, Issue 2, 2023]
-
Surface metrology
[Review Article] Recent Techniques in Surface Metrology [Volume 1, Issue 1, 2021, Pages 2-21]
-
Surface plates
Methods of Union Jack and XY-Grid in Surface Plate Measurements [Volume 3, Issue 2, 2023, Pages 2-14]
T
-
Terahertz technology
[Review Article] Recent Techniques in Surface Metrology [Volume 1, Issue 1, 2021, Pages 2-21]
-
Textile fabrics
Facile route for synthesis of flame retardant, antibacterial and conductive fabrics [Volume 3, Issue 2, 2023, Pages 42-56]
-
Track Etching Parameters
Evaluation of CR-39 Track Parameters by Utilizing Chemical Organic Additives to NaOH Etchant [Volume 1, Issue 1, 2021, Pages 61-73]
-
Treatment planning systems
Insights to Achieve More Accuracy for the Conventional Treatment Planning Systems [Volume 1, Issue 1, 2021, Pages 33-52]
-
T-TEST
A proposed method using t-test for stability check in proficiency testing in tensile and hardness tests [Volume 3, Issue 1, 2023, Pages 35-43]
U
-
Ultrasonic
Metrological and Optical –Mechanical Study of a Band Pass Glass Filter Working as Photometric Filter [Volume 1, Issue 1, 2021, Pages 22-32]
-
Ultraviolet (UV)
Recent Preventive Methods to Reduce the Infection Diseases by Air Distributions Control [Volume 3, Issue 1, 2023, Pages 2-28]
-
Union-Jack
Methods of Union Jack and XY-Grid in Surface Plate Measurements [Volume 3, Issue 2, 2023, Pages 2-14]
X
-
XY-Grid
Methods of Union Jack and XY-Grid in Surface Plate Measurements [Volume 3, Issue 2, 2023, Pages 2-14]
Your query does not match with any item